The TransectPlotter has been modified to run on 64-bit machines. Please see installation instructions below for more information.

The "stations.txt" file (needed to run the TransectPlotter) has also be updated to include to include the current (2013) version of EDEN gages. The new file has been zipped up with both the 32-bit and 64-bit programs.

You will need the following files:

Required for execution of the program:

(Note: if you previously installed other EDENapp tools, then you may have some or all of these items already installed)

1. EDENTransect Plotter.exe (.zip, 106-237 KB, currently at v. 1.2)
   • Executable file can be copied to any location on your computer
   • Download: 32-bit version | 64-bit version
2. List of EDEN stations and locations (updated September 10, 2013)
   • Used to incorporate nearby gage locations on the transect plot
   • Filename must be stations.txt
   • Must be copied to folder containing the TransectPlotter.exe file
   • Included as part of the EDENTransectPlotter.zip file download
3. netCDF dlls (.zip, 176 KB)
   1. For 32-bit systems: extract all the files in netcdf-3.6.1-win32.zip and copy them to C:\Windows\System32\
   2. For 64-bit systems: extract all the files in netcdf-3.6.1-win32.zip and copy them to C:\Windows\SysWOW64\
4. Microsoft .Net version 2.0 (download from Microsoft's website)
   • Note: this may already be installed on your machine. Go to: Start > Control Panel > Add or Remove Programs. If Microsoft .Net Framework is installed, it will appear in this list

Required User Input Files:

1. EDEN DEM file for ground elevation (updated January 2010)
   • Must be in netCDF file format (.nc)
   • Please note: The released January 2010 data was modified in two ways:
     • First, elevation values have been converted from meters (m) to centimeters (cm)
     • Second, data has been removed from the southern Big Cypress National Preserve and northwestern Everglades National Park area so that this DEM boundary matches the boundary or domain of the EDEN surface-water model still in use in EDEN applications software. This is the area noted in yellow in the right-hand map below.
   • Metadata is also available for this DEM and has been included in the EDEN DEM zip file.
2. EDEN daily water level surfaces (must be in NetCDF file format (.nc))
3. Transect points file (see User's Guide below for more information)

User's Guide (pdf, 545 KB - updated September 10, 2013)

Notes:

• EDEN TransectPlotter can only run on a Windows machine
• The netCDF dll is required to use EDENapps. Extract all the files in netcdf-3.6.1-win32.zip and copy them to the appropriate location, depending up whether or not you have a 32- or 64-bit system.